How often should I clean my firearm?

Every time you shoot the firearm, a minimum cleaning with a bore snake or coated rod and mop should be done.  Every 500 to 1000 rounds the firearm should be taken to a qualified gunsmith for thorough cleaning and a close inspection.

 

Is a gunsmith cleaning different than what I can do?
 Generally, yes.  A qualified gunsmith will take down the firearm to its individual components and thoroughly clean, lubricate, and inspect all parts.The gunsmith will also look for any parts with undo wear or fatigue
 

I shot my firearm and it made a "funny" sound and the bullet casing will not extract from the chamber.  What's wrong?
You could have a dangerous condition called a "Squib Load".Do not attempt to fire the gun again. This condition could potentially be an unsafe condition and should be handled with extreme care by the operator.Never assume the bullet has fired and do assume the firearm is loaded in this condition. If you can, keeping the muzzle of the firearm downrange, remove the magazine and engage the safety.If possible, lock the slide back in the open condition. If you are not experienced or have not dis-lodged a stuck round, bring the firearm to us immediately in an acceptable gun bag or case with the safety on and the bolt locked open.

 

What is a "Red Tag" that gun people refer to?
 A red tag will be issued and attached to a firearm that has been examined and deemed unsafe.  This tag is also recorded on the gunsmith documents and is available for examination by the BATFE. A gunsmith has a duty to red tag any firearm that is found to be a danger when firing. Once the firearm is repaired the tag can be removed.

 

I have taken my firearm apart and now I can't get it back together.  Can you help me?
 Absolutely.  And without judgment. Make sure all of the parts are packed and sealed in a plastic bag and bring them to 2A-Armory.